Outputs - Bosch ICP-EZM2 System Reference Manual

46 en | Programming
Account Number Entries
Entry
C
D
E
F
5.1.4

Outputs

Output devices consist of horns, bells, strobes, or sirens.
Outputs Enter an output number from 1 to 4
1 Set Output Function
– Press [1] to select the current
option.
– Press [2] to hear more options.
– Press [#] to exit Output Function.
# Exit Points
Return to Installer Menu.
Notice!
When the installer PIN is entered at the keypad or phone, a 3 sec time window starts. During
that time window, a tamper alarm activates the interior siren for only 1 sec. Open the
enclosure door during this time to silence the sirens during maintenance. Once the enclosure
is closed, tamper alarm is restored after a 3 minute delay. Tampers are logged and reported.
Warning!
If you modify system parameters you are responsible for maintaining the system within the
!
scope of the standard and regulations that apply to the hardware and/or the system in which
it is used. In a NF A2P compliant installation, use only NF A2P listed components, and check
that each parameter is in the authorized range.
2014.09 | 01 | F.01U.306.221
Key Press
[*][2]
[*][3]
[*][4]
[*][5]
Output Functions:
–
–
–
–
–
–
–
–
System Reference Guide
Phone Number/IP Address Entries
Entry
#
.
Pause
Exit with Save
Disable phone number
Disable IP address
[*] = . between each IP address notation.
1
Press [#] twice within two seconds to exit without saving
2
your entry.
Disabled
Intrusion
Intrusion Latching
Fire
Fire Latching
Intrusion and Fire
Intrusion and Fire
Latching
System Reset
Easy Series Control Panel
Key Press
[*][#]
[*]
1
[#]
[#][#]
2
[0][#]
240.0.0.0
Output Functions (cont.):
– System On
– System Ready
– Key Fob On/Off
– Key Fob 2-sec Pulse
– User Controlled
– Interior Intrusion and
Fire
– System On (Unoccupied)
Bosch Security Systems, Inc.