Installation Considerations; Radion Specialty - Bosch ICP-EZM2 System Reference Manual

Easy Series Control Panel
8.13.1

Installation considerations

You have a variety of installation options to consider when installing the device. You must
acknowledge the unique installation approach prior to installation. Some installation
considerations include:
–
–
–
–
–
–
–
Notice!
EN requirements
For further information regarding certified installations, please refer to EN product
requirements.
How to read the Graphical Magnet Distances table
Contained in the recessed door/window contact Installation Guide is a graphical table along
with the X ￚ Y coordinates graphic. Use the table in conjunction with the graphic to determine
desired distances between the magnet and the transmitter based on the type of installation.
8.14

RADION specialty

RFBT is a designed transmitter (bill trap) specifically used in financial or retail environments.
It transmits a silent, wireless alarm signal without local notification (no LED activation) when a
bill, or any other form of paper currency is removed from the transmitter – typically, the last
bill in the bottom of a cash drawer.
Features include:
–
–
Dimensions
Power/voltage
Bosch Security Systems, Inc.
The installation of this device is suitable for wood surfaces. This device is not suitable for
steel surfaces.
The transmitter housing was designed to be open with a coin. Using a screwdriver may
cause damage to the plastic top.
When reinserting the PCB (battery and antenna assembly), verify that the PCB assembly
fits into the grooves of the transmitter housing.
When reinserting the plastic top, verify that the top fits into the designed grooves of the
transmitter housing.
When installing the transmitter in an overhead location, be mindful that the PCB
assembly may fall out of the transmitter housing.
The removal of the plastic flaps is optional, depending on your installation needs.
For added security, you can use an adhesive with the screws to secure the transmitters
and magnets.
Brief illumination of LED to signify armed and operational status
Wall tamper alarm when removed from the cash drawer.
System Reference Guide
Device Specifications and Overview | en
48.80 mm x 154.10 mm x 23.60 mm
(1.92 in x 6.06 in x 0.93 in)
1.5 VDC, Lithium (
Power source type: C
Low battery level: 0.9V
)
2014.09 | 01 | F.01U.306.221
93