Programming Keys - Bosch ICP-EZM2 System Reference Manual

Easy Series Control Panel
Figure 4.1: Modem Connections
1
2
3
3.
Network
Select this method to establish a network connection between the RPS computer and the
control panel using the B450 or the B426.
4.3

Programming Keys

After you program a control panel using the Phone Menus or RPS, you can use a programming
key to transfer data from that control panel to another control panel. You can also use a
programming key to back up control panel data.
1.
2.
Bosch Security Systems, Inc.
Connection using internal modem
Connection using external modem
270 Ω to 330 Ω, ¼ W resistor (for Direct Connection option only)
If the first communication attempt fails, connect a 270 Ω to 330 Ω, ¼ W resistor in series
with the Tip House side.
If the system is on, turn it off.
Place the key's lock switch in the desired position. Refer to the figure below.
System Reference Guide
Programming Access Options | en
2014.09 | 01 | F.01U.306.221
41