Bosch ICP-EZM2 System Reference Manual page 42

42 en | Programming Access Options
Figure 4.2: Programming Key Lock Positions
1
2
1.
2.
2014.09 | 01 | F.01U.306.221
Send data from control panel to key
Send data from key to control panel
Insert the key into the control panel board.
– Auto Transfer: If Expert Programming Item Number 123 = 1 (refer to Programming
Key Auto Transfer in System Programming Items, page 48), the programming key
automatically transfers data depending on the position of the lock switch.
– Manual Transfer: If Expert Programming Item Number 123 = 0, you must use the
Installer Menu to access the programming key.
The control center announces when data transfer is completed.
When the (√) LED flashes green, data transfer is successful.
If the (√) LED flashes red, the data transfer is unsuccessful. Remove and reinstall the key.
System Reference Guide
Easy Series Control Panel
Bosch Security Systems, Inc.