Easy Series Control Panel
2
Overview
This document contains instructions for a trained installer to properly install, configure, and
operate the Easy Series control panel, and all optional peripheral devices.
You will install and configure the system using the figures starting in System Components and
Wiring, page 18 and the information in System Installation and Configuration, page 25. The
sections following Sections 1 and 2 provide supporting details for installation, configuration,
testing, and support.
2.1
Installation Workflow
To properly install, configure, and test the system, use the following workflow:
Step
1. Plan the
Installation
2. Install the
Hardware
4. Configure the
System
5. Program the
System
6. Test the System
Table 2.1: Installation Workflow
Bosch Security Systems, Inc.
Description
Identify suitable locations for system components in the
installation site.
Install all system components.
Enroll wireless devices into the system, perform basic
programming for the system, and add users to the system.
Update the system with expert programming.
Perform a full system test. Ensure that the central monitoring
station received test reports.
System Reference Guide
Overview | en
17
Page
Plan the Installation,
page 25
Install System
Components, page 25
Configure the System,
page 32
Programming Access
Options, page 38
Test the System, page
66
2014.09 | 01 | F.01U.306.221