Names And Functions - Toshiba TOSVERT VF-MB1 Instruction Manual

1.3

Names and functions

1.3.1 Outside view
Upper terminal cover
This is the cover of input
power circuit terminal for
up to 4.0 kw.
EASY lamp
Lights when operating
by EASY key.
RUN lamp
Lit when a frequency is
not output with the ON
run command. This lamp
blinks when operation
starts.
PRG lamp
When lit, the inverter is
in parameter setting
mode. When blinking,
the inverter is in auh
or gru.
MON lamp
While this is lit, the inverter
is in monitor mode.
While blinking, the inverter
is in "Past Trip History
Details Monitor Display".
* CANopen is the registered trademark of CAN in Automation.
[Control panel 1]
A-3
E6581697
Charge lamp
Indicates there is a high
voltage still in the inverter.
Do not open the terminal
block cover when this lamp
is lit because it is dangerous.
®
CANopen LED
Lights and blinks when
®
using CANopen
communication.
NET lamp
Lights when using the
communication option.
％ lamp
Displayed numbers
are percents.
Hz lamp
Displayed numbers are
in Hertz.
1