Names And Functions - Toshiba TOSVERT VF-nC3 Instruction Manual

1.3

Names and functions

1.3.1 Outside view
With cover closed
[Front view]
Hole for control wire
[Bottom view]
Note 1) Remove the seal as shown on the next page when installing the inverter side by side with
Note 2) Some models are wrapped in plastic.
Optional connector (RJ45)
Hole for main
circuit wiring
other inverters where the ambient temperature will rise above 40°C.
A-3
Charge lamp
Indicate s there is a high
voltage still in the inverter.
Do not open the terminal
block cover when this lamp
is lit becaus e it is
dangerous.
Cover
This is the body or terminal
block cover.
Always close this cover
before operatio n to avoid
accidentall y touchin g the
terminal block.
Door lock hole
You can lock the door by
shutting it an passing a wire
key through this hole.
Upper caution plate (sticker) (Note 1)
Cooling fin (Note 2)
Name plate
[Side view]
E6581595
1
Ventilation