Names And Functions - Toshiba TOSVERT VF-nC3 Instruction Manual

1.3

Names and functions

1.3.1 Outside view
With cover closed
[Front view]
Hole for control wire
[Bottom view]
Note 1) Remove the seal as shown on the next page when installing the inverter side by side with other inverters
where the ambient temperature will rise above 40°C.
Note 2) Some models are wrapped in plastic.
RS485 connector
Hole for main
circuit wiring
A-3
Charge lamp
Indicate s there is a high
voltage still in the inverter.
Do not open the terminal
block cover when this lamp
is lit because it is dangerous.
Cover
This is the body or terminal
block cover.
Always close this cover
before operation to avoid
accidentally touching the
terminal block.The serial
number is recorded on the
back side.
Door lock hole
You can lock the door by
shutting it an passing a wire
key through this hole.
Upper caution plate (sticker) (Note 1)
Cooling fin (Note 2)
Name plate
[Side view]
E6581595
1
Ventilation