Expansion Cards Supported By Serverstart; Cautions For Manual Installation - Fujitsu Primergy RX100 S3 User Manual

2.3.5 Expansion Cards Supported by ServerStart

ServerStart supports automatic driver installation for the following expansion cards.
Onboard FDD/IDE
Onboard LAN
Onboard VGA
LAN Card
SCSI Ctrl U160 lp

2.3.6 Cautions for Manual Installation

■ Free Space Required for Installation
The partition where the OS is installed must have enough free space for obtaining memory dump. For
more details, refer to"5.1 Memory Dump/Paging File Setting" ( pg.134).
■ Installing Windows 2000 Server
To install Windows 2000 Server directly, you have to use Service pack 4 integrated OS media or install
Service Pack 4 or newer Service Pack.
And please install hotfix module named KB904374 after OS installation.
Please find out hotfix module of your language version from the following folder on ServerStart CD.
[CD-ROM drive]: \HOTFIX\W2K\
■ Cautions on Restarting
In the course of installation, a message appears to indicate that the setup program restarts. Wait until it
restarts automatically.
For background operations, refer to "Onboard SCSI RAID User's Guide".
table: Automatic Expansion Card Driver Installation
Name
PRIMERGY RX100 S3 User's Guide
Model
-
-
-
PG-1852
PG-1862
PG-1882L
PG-1892L
PG-1301L
Bus
-
PCI-E
PCI
PCI
PCI
PCI
PCI
PCI
47
2