Appendix K How To Confirm Firmware Of Sas Raid Controller Card; How To Confirm Firmware Version Of Sas Raid Controller Card; Figure K.1 Boot Manager Front Page (1) - Fujitsu PRIMEQUEST 2000 Series Administration Manual

Appendix K How to Confirm Firmware of SAS RAID Controller Card

K.1
Appendix K How to Confirm Firmware of
This section explains how to confirm the firmware of I/O device.
K.1 How to confirm firmware version of SAS RAID controller
card
You can confirm firmware version of SAS RAID controller card by WebBIOS and ServerView RAID.
Note
Below figures are sample window. Contents such as version shown in figures may differ from that of actual
windows in your system.
Confirming by WebBIOS
1. Select [Force boot into EFI Boot Manager] from [Boot Selector] in [Power Control] window of MMB Web-
UI.
Partition is powered on and Boot Manager front page appears.
2. Select [Boot Manager] and press [Enter] key. [Boot Manager] window appears.

How to confirm firmware version of SAS RAID controller card

SAS RAID Controller Card

FIGURE K.1 Boot Manager front page (1)

285
C122-E175-02EN