Clerk Sign-On/Sign-Off; Direct Sign-On; Coded Sign-On - Sam4s ER-230 Series Operation And Program Manual

Clerk Sign-On/Sign-Off

See "System Option Programming", to review your clerk options:
•
Depending on how your machine has been programmed, sign-on will take place only at the
beginning of a shift (stay-down), or may have to be repeated for each transaction (pop-up). If
your machine has been programmed for stay-down clerks, the clerk currently signed on must
be signed off before another clerk may be signed on.

Direct Sign-On

To enter the clerk number and press the clerk .
CLERK
Clerk # (1-10)
To sign the clerk off, Enter 0 (Zero) and press the clerk key .
0 CLERK

Coded Sign-On

To sign on a clerk, press the clerk key, enter the clerk code, then press the clerk key again.
CLERK
To sign the clerk off, enter 0 (Zero) and press the clerk key.
0
12 • Operating Instructions
System option #2 allows you to select direct or code entry sign on and/or stay-
down or pop-up operation.
Clerk Code (up to 6 digits)
CLERK
CLERK
ER230 Series