Clerk Sign-On/Sign-Off; Direct Sign-On; Coded Sign-On - Sam4s ER-230 Operation And Program Manual

Clerk Sign-On/Sign-Off

See "System Option Programming" to review your clerk options:
•
System option #2 allows you to select direct or code entry sign on.
•
System option #3 allows you to select stay-down or pop-up operation.
Depending on how your machine has been programmed, sign-on will take place only at the beginning
of a shift (stay-down), or may have to be repeated for each transaction (pop-up). If your machine has
been programmed for stay-down clerks, the clerk currently signed on must be signed off before
another clerk may be signed on.
Check with your store manager to see which options have been selected for your register.
A clerk must be signed on before any transaction may take place. CLOSEd or CLOSED will appear
on the display if fail to do so. Clerk sign-on is accomplished in one of two ways:
To sign On/Off Clerk, need to turn control lock to REG-Mode.

Direct Sign-On

To sign on a clerk, enter the clerk number and press the CLERK key.
X is clerk number start from 1, for the maximum number, please see S-Mode, Memory Allocation
Scan, look for #2 ALLOCATED CLERK IS: for detail. Default is 15 (ER-230 is 5).
To sign the clerk off, enter 0 (Zero) and press the CLERK key.

Coded Sign-On

To sign on a clerk, press the CLERK key, enter the clerk code, and then press the CLERK key
again.
When Clerk Interrupt is activated (please see "Table Management and Clerk Interrupt
Operations" in Operation Instructions), to sign on a clerk is enter the clerk code then press the
CLERK key.
To sign the clerk off, enter 0 (Zero) and press the CLERK key.
40 • Getting Started
X CLERK
0 CLERK
CLERK
Clerk Code (up to 6 digits)
Clerk Code (up to 6 digits)
0 CLERK
CLERK
CLERK
Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU