Program 70 - Function Key Options Programming - Sam4s ER-900 Series Operation And Program Manual

Program 70 - Function Key Options Programming

Use Program 70 to set options for function keys. Because of the differences inherent in function keys,
individual options will be different. See the specific instructions for each key in this chapter to find
the options for each key.
Programming the Function Key Options/Status
1. Turn the control lock to the PGM position.
2. To begin the program, enter 7 0, press the SUBTL key.
3. Enter the values for the option digit or digits. Depending on the function key you are
programming, you may enter up to six digits - N1 through N6. Determine the values for
N1 through N6 by referring to the specific function key information that follows. (You
do not need to enter preceding zeros. For example, if the function key offers six digits,
N1 through N6 and you are only selecting a value for N6, just enter the value for N6.)
Press the function key you wish to program.
N1
4. To program additional function keys, repeat from step 3, or press the CASH key to
finalise the program.
CASH
150 • Program Mode Programming
7 0 SUBTL
N2 N3 N4
FUNCTION
N5 N6
KEY
SAM4S ER-900 Series Electronic Cash Register AU