Default Programming; Descriptor Programming Methods - Sam4s ER-230 Operation And Program Manual

Program Mode Programming

Default Programming

•
All keyboard PLUs are Taxable, Preset and Override, without entry limits by default
status programming of "400000000".
•
All system options are set to 0 in default programming, unless otherwise noted. Change
only the options that will deviate from default programming. There is no need to re-enter an
option status of 0, since 0 is its original setting.
•
All programming (unless otherwise noted) is done with the control lock in the PGM-Mode.
Each section details a specific area of register programming.
•
The Default program is set to 10.000% VAT on Tax 1 and the description is set to GST
already.

Descriptor Programming Methods

Descriptors are programmable for PLUs, function keys, groups, clerks and the logo/messages. There
are two methods available to program descriptors, the Alpha Overlay and the Descriptor Code
Methods. Alpha Overlay Method is the default programming method.
To switch between two methods, for ER-230, ER-4xx and ER-52xx, please see Option #25-1; for
ER-3xx, please see Option #30-3; of "System Option Programming" in "Program Mode
Programming".
This chapter describes both methods. All Sam4S 230, 3xx, 4xx and 52xx Series use Alpha Overlay
Method by default except ER-5215/M uses Descriptor Code Method by default and is the only
method. ER-380 EPROM v1.6 and earlier and ER-380M EPROM v1.3 and earlier does not have
Overlay method build-in as well. You can select each method by System option programming.
Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
Program Mode Programming • 135