Appendix A: Specifications; C2 Communications Controller Specifications - Elan C2 Communications Controller Installation Manual

E L A N H O M E S Y S T E M S

Appendix A: Specifications

Item
Power Requirements
Home phone battery voltage
C.O. Access Lines
Relay Type
Current Limit
Music-On-Hold (MOH)
Input Level (mono)
Page/Doorbell (P/DB) Output
Output Level (momo)
Volume Control Override (VCO)
Internal Power Supply
Trigger Inputs (2)
Connector Interfaces
AC Power
VIA!NET IN/OUT
Trigger Output
Trigger Input
Relay/VCO Connections
Relay/VC Power
Audio Loop In/Out
Music On-Hold (MOH IN)
Door Station Bus
Phone Out (2-Line)
TELCO In (2-Line)
Door Station Bus
Mic /Speaker max gain
Recommended Wire
Doors Station Assembly
RJ-45 interface (VIA!Net)
RJ-14 "Telco" interface
Dimensions w/Feet (1U w/o Feet)
© ELAN Home Systems 2009 • All rights reserved.
Table A-1 C2 Communications Controller Specifications
Description
120V, 60Hz, 25W
48VDC
2
NO/NC/COM dry contact
30VAC/DC @ 4A (max ea.)
0 to 2.5 p-p max, adjustable
Muted to +6dB.
(MOH suggested input level is between -10dBv and 0dBv)
0 to 2.5 p-p max, adjustable
Muted to +6dB
1A, 12VDC
Current limited + 12VDC Output
(connect to dry closure only)
3-Prong Heavy Duty Power Cord
RJ-45
3.5mm Connectors
Removable Locking Connectors
Removable Locking Connectors
Removable Locking Connectors
RCA Type, Line Level Only
RCA Type, Line Level Only
Removable Locking Connectors
RJ-14
RJ-14
+6dB Boost
Cat-5 Communications Wire (1000 ft. max)or 2-conductor "bell" wire
Cat-5 Communications Wire
Cat-5 Communications Wire
17 W X 2 3/8 H X 12 1/2 D (in.)
432 W X 60 H X 318 D (mm)
C2
INSTALLATION MANUAL
Page 57