C2 Trigger Outputs - Elan C2 Communications Controller Installation Manual

E L A N H O M E S Y S T E M S

C2 Trigger Outputs

The Trigger Output choices are SUM, PG, DB1 and DB2. See Table 3-1.
CAUTION: ALWAYS remove power to the C2 along with any other
electronics equipment prior to making any connections to or from the
C2. Set the Power Switch on the back of the C2 to the OFF
position prior to making connections.
Trigger Output
SUM
PG
DB1
DB2
© ELAN Home Systems 2009 • All rights reserved.
C2
POWER
Figure 3-4: C2 Trigger Outputs
Table 3-1: C2 Trigger Outputs
Description
Activates when page and doorbell occurs. Use SUM if you want music to mute and the page/
doorbell audio to be heard over the house speakers. SUM is used to trigger
the page/doorbell input of an ELAN controller, such as a S66A, S128P. Use
a 3.5 mono interconnect cable.
Activates only when a page occurs. Use PG if you want trigger automated events when a
page is initiated, see Figure 3-22 and Figure 3-26 for applications. Use a 3.5mm stereo inter-
connect cable.
Activates when doorbell from Door Station 1 is pressed. Use DB1 if you want trigger automat-
ed events when the doorbell from Door Station 1 is pressed, see Figure 3-22
and Figure 3-26 for applications. Use a 3.5mm stereo interconnect cable.
Activates when doorbell from Door Station 2 is pressed.Use DB2 if you want trigger automat-
ed events when the doorbell from Door Station 2 is pressed, see Figure 3-22 and Figure 3-26
for applications. Use a 3.5mm stereo interconnect cable.
ELAN MULTI-ROOM CONTROLLER
Page Trigger In
3.5mm
mono-mini
cable
IN SUM PG
DB 1 DB 2
OUT OUTPUTS
VIA!NET
C2
INSTALLATION MANUAL
TRIGGERS
1 2
+ - + -
INPUTS
Page 31