Incoming Calls While Paging; Paging With A Caller On Line; Incoming Calls While Using The Door Station Assembly - Elan C2 Communications Controller Installation Manual

E L A N H O M E S Y S T E M S

Incoming Calls While Paging

• While in page mode, if there is an incoming call you will hear a ring over the handset
every fourth ring. To access the caller, press the flash-hook button.
• While on a phone-to-phone intercom (#,7,0), if there is an incoming call, you will hear
the phone ring over the handset every fourth ring. To access the caller press any digit
except "0" or the flash-hook button.

Paging With A Caller On Line

• Pressing #, 7 (P) puts the caller on hold while you page. Pressing the flash-hook button
will bring the caller back on line. If you hang up the phone after paging, the person you
paged need just pick up any phone in the house and the caller will be there.
• If you followed a #,7 command with a numeric 0 to initiate a phone-to-phone intercom,
press any digit, or the flash-hook button to get the caller back.

Incoming Calls While Using the Door Station Assembly

• Press #,3 (D) to initiate two-way communications to your ELAN Door Stations.
• If, while communicating via a door station, there is an incoming call, you will hear an
alert over the handset every fourth ring. To access the caller, press the flash-hook
button. To re-access the door station you must press the #,3 (D) keys again.
© ELAN Home Systems 2009 • All rights reserved.
C2
INSTALLATION MANUAL
Page 17