To Program Local Lockout; To Unlock The Front Panel; Dial-Up Networking And The Passcode; If You Have Forgotten Your Passcode - Orban OPTIMOD-FM 5500 Operation Manual

OPTIMOD-FM DIGITAL

To Program local lockout:

A) Navigate to Setup > S
If the front panel is already password protected, you can only access this
screen by entering a passcode with A
B) Hold down the A
lockout time (if any).
You can program the lockout delay time (in hours:minutes) from 15 min-
utes to 8 hours, or O
local front panel control and when the front panel automatically locks it-
self out, requiring that you enter a passcode to regain front panel con-
trol of the 5500.
Autolock can only be turned on if at least one passcode exists with A
A
CCESS
unlock the panel or to turn off the Autolock function.
C) Press the Escape button to leave the Security menu.

To Unlock the Front Panel:

A) On the 5500 front panel, operate any button or the knob.
The P
ASSCODE
B) Enter a passcode using the four soft buttons.
The 5500 functionality that you can access depends on the security level
of the passcode that you entered.
After you have finished working, the panel will automatically re-lock af-
ter the time delay you set in Setup > S
new delay at any time if you have an A

Dial-up Networking and the Passcode

When you make a Windows Dial-up Networking connection, Windows will ask you
for your passcode. To allow the connection to occur, enter any passcode that you set
at the 5500's front panel. Once your PC is connected to the 5500, you will be able to
access the 5500 functionality corresponding to the security level of your passcode.
If you have not set a passcode, leave the Windows dialog box blank.

If You Have Forgotten Your Passcode

You can reset factory defaults and wipe out security passcodes (in case you forgot
your A A passcode).
LL CCESS
A) Remove power from the 5500.
B) While pressing both the Escape and Setup buttons, restore power.
.
ECURITY
soft button and turn the knob to set the desired
UTOLOCK
. This is the time delay between the last access to a
FF
privileges because an A
screen will appear.
A privileges.
LL CCESS
A passcode is required to fully
LL CCESS
> A
ECURITY UTOLOCK
passcode.)
A
LL CCESS
INSTALLATION
LL
. (You can set a
2-41