Source Setups; Source Connections - Christie GraphXMASTER RPMS-D100U User Manual

2.1. Introduction
2.2. Source
Connections
This section provides instructions on how to connect various sources to the projector.
A variety of external sources can be connected to the input ports on the Electronics
Module (EM) main input panel. Figure 2.1. illustrates the differences between EM
models D100U (left) and D100UF (fixed frequency shown on right).
NOTE: The EM is vertically mounted to the projector's mounting rails (orientation
illustrated in Figure 2.1.). For the purpose of illustrating source connections, it will
be shown in a horizontal position.
Figure 2.1. Comparing connector availability between model models
Source Setup
RPMS, CS50 & CS70-D100U/UF User's Manual
S e c t i o n 2
2-1