Navigating The Menus - Christie GraphXMASTER RPMS-D100U User Manual

OPERATION
3.4 Navigating the
Menus
On-line Help
RPMS, CS50 & CS70-D100U/UF User's Manual
3-8
*
Display Display
and follow immediately with
toggle (useful if you are unsure of the present status).
Most of the controls for the projector are accessed from within the projector's menu
system. The Main Menu is accessible by pressing the
This menu is accessible at any time during operation. From it you can access various
other "sub-menus" with related functions.
On the keypad, either enter the number corresponding to the sub-menu you wish to
2
access, such as for the Image Settings menu, or use the
desired option and press
The only menu item that does not offer a sub-menu, but activates an action is "Auto-
Setup". When selected it will begin an automated process of optimizing critical
display parameters such as size, position, pixel tracking, etc.
Once you have a sub-menu displayed, navigate in a similar manner—enter a menu
option number for any numbered option, or use
Enter
press at the desired option. Extra long menus have a scroll bar on the right–use
the arrow keys to see the remainder of the menu. Items that are locked out or do not
pertain to the current action appear "grayed-out" and cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are
disabled. 2) After 15 minutes of inactivity, the projector leaves the menu system and
returns to the presentation. 3) The Status menu is read-only.
When finished with a sub-menu, do one of the following:
•
Exit
Press
•
Menu
Press
return to presentation level
'
If at any time you are uncertain what to do next, press
information about the current menu or highlighted option. A scroll bar appears on the
right-hand side of a help window if there is additional text–use the arrow keys to
Help
scroll. Press again to exit. At the bottom of some menus, a line of hint text also
appears.
Help
Press , from presentation level to access general Help Topics. Scroll as necessary
within a topic. Press
ON
or
menu Main Menu
1. Size and Position
2. Image Settings
3. Channel Setup
Choose a
4. Configuration
function
5. Lamp
6. Status
7. Auto Setup
Enter
. The sub-menu you selected will then appear.
to return to the previous screen
to return to the main menu, press
Exit
to return to your presentation.
OFF
if you want to guarantee the correct
Menu
key on the remote keypad.
keys to highlight the
to move the highlight and
Menu
a second time or
Help
to display detailed
Exit
to