Christie GraphXMASTER RPMS-D100U User Manual page 5

SOURCE SETUP
RGBHV (5 BNCs)
Component Video (YPbPr)
2-2
RPMS, CS50 & CS70-D100U/UF User's Manual
'
Input 1 provides 5 BNC connectors for connecting to a variety of sources such as
VGA, SVGA, XGA, SXGA, Mac, PowerMac, DEC, Sun, SGI and others. This
projector supports multiple sync types with RGB signals: sync-on-green, composite
sync, and separate H & V syncs.
To properly connect RGB sources to
(Figure 2.2.). NOTE: Front panel shown for the D100U model – connection is the
same for D100UF.
RGB Source Outputs
sync-on-green
composite sync
separate horizontal and
vertical sync
NOTE: Connect the Sync BNC inputs first.
'
Connect a YPbPr signal (component video) to INPUT 1. See Figure 2.3.
NOTES: 1) Not applicable to D100UF models. 2) If, for some reason, the projector
fails to recognize a YPbPr signal, specify this Color Space option within the Image
Settings menu. 2) Do not connect digital component signals to
appropriate digital interface installed at
INPUT 1
use the table and illustration below
Connectors at INPUT 1 (5 BNCs)
Red Green
√ √
√ √
√ √
Figure 2.2. Connecting RGBHV sources
INPUT 2
Blue Hor/Comp
√
√ √
√ √
INPUT 1
. Use the
.
Vert
√