Christie GraphXMASTER RPMS-D100U User Manual page 41

OPERATION
Image Settings
RPMS, CS50 & CS70-D100U/UF User's Manual
3-24
NOTE: Unavailable options appear grayed out.
Tiling Setup
This submenu provides options that will help you define the size of your display wall.
See 3.8 Working with Multiple Projectors later in this section for details on how to
use the options in this menu.
'
Use the options available in the two-page Image Setting Menu to alter your image.
Options not available are grayed out and cannot be selected. Changes made to the
Image Settings menu are applied immediately and are saved when you exit the menu
Exit Menu
(press or ).
Figure 3.12. Image Settings Menu
NOTES:1) Detail, Color Space, Video Options, Processing Mode, Motion Filter,
Noise Reduction, Horizontal Filter, Vertical Filter are not available in D100UF
projector models. 2) Dark Interval and Invert Stereo3D options are not available in
this projector.
Contrast
SHORT CUT:
( Press
Contrast increases or decreases the perceived difference between light and dark
areas of your image (0-100). If contrast is set too high, the light parts of the image
lose detail and clarity. If set too low, the light areas will not be as bright as they could
be and the image will be dim. Start low and increase so that whites remain bright but
are not distorted or tinted, and that light areas do not become white (i.e., are
"crushed"). For best results, keep close to 50.
Cont
and adjust the slidebar.)
(page 1 and 2 shown)