Christie GraphXMASTER RPMS-D100U User Manual page 33

OPERATION
Editing a Channel Setup
RPMS, CS50 & CS70-D100U/UF User's Manual
3-16
TO DELETE A CHANNEL
Enter
then press to activate the Channel Copy/Delete submenu. Select Delete and
Enter
press —a confirmation window will appear to make sure that you really want to
delete this channel.
TO DELETE MULTIPLE CHANNELS
Func
and press to go to the Channel Copy/Delete submenu. Select Delete Unlocked
Enter
Only and press
to delete all channels, even those that are locked. In either case, the current channel
will remain but will be redefined from projector defaults.
NOTE: For any deletion, a confirmation box appears to make sure that you really
want to delete. Select Cancel (default) if you don't want to delete after all.
'
The basic setups that describe how and where a channel can be accessed are listed in
the Channel Setup menu. These channel setups can be edited at any time in the
Channel Edit submenu.
To edit a channel, do the following:
1. Display the Main menu (press
press , or move the highlight to the Channel Setup option and press
Channel Setup menu will appear.
2. To edit parameters shown in the Channel Setup menu, select the relevant channel and
Enter
press .
Figure 3.7. Copying A Channel
, highlight the desired channel in the Channel Setup menu,
Figure 3.8. Deleting a Channel
, highlight any channel in the Channel Setup menu
to delete all unlocked channels. Or select Delete All Channels
Menu
key). To display the Channel Setup menu,
Enter
. The