Christie GraphXMASTER RPMS-D100U User Manual page 32

'
Copying or
Deleting Channels
Table 3.1. Abbreviations for Signal Type
Abbrev. Signal Type
4WH Composite (4 wire) on HC input
4WV Composite (4 wire) on V input
SG Sync-on-green
SR Sync-on-red
5W Separate H,V
5WR Separate H,V swapped
SVid S-Vid
CVid Composite Video
3LH Tri-Level on HC input
3LV Tri-Level on V input
3LG Tri-Level on green
E3LH European Tri-Level on HC input
E3LV European Tri-Level on V input
E3G European Tri-Level on green
Dig Digital
If you have more than a handful of channels, use
channels not visible in this initial display.
To copy, delete or edit any of the channels listed in the Channel Setup menu,
highlight the desired channel and do one of two things:
•
Func
Press if you want to copy the selected channel or delete this or other
channels. See Copying or Deleting a Channel below.
•
Enter
Press if you want to edit channel setups (i.e., non-image related
parameters) for the selected channel. See Editing a Channel Setup, below.
TO COPY A CHANNEL
, highlight the desired channel in the Channel Setup menu, then
Func
press to go to the Channel Copy/Delete submenu. Select Copy and press
a new channel will be created. It is identical to the original, which still remains, but it
is identified with the next available number from 01-99. If you change your mind and
do not want to copy the current channel, press
previous menu. Copying channels is a quick method for creating numerous channels,
each of which can then be edited and adjusted for a variety of presentations in the
future.
and
to cancel and return to the
Exit
RPMS, CS50 & CS70-D100U/UF User's Manual
OPERATION
to see the remaining
Enter
—
3-15