Configuring Light Settings; Setting Light Source Mode - Christie Inspire Series User Manual

Configuring light
settings
Learn how to configure the light settings.

Setting light source mode

Set up the light source to control the projector brightness.
1. Select Menu > Light Source > Light Source Mode.
2. Set up the appropriate light source model:
• Constant Power—Enable Constant Power to set the projector brightness to a specific
level controlled by the laser diode power. See
more details of setting the laser diode power.
• Constant Intensity—After enabling Constant Power, select Constant Intensity to
maintain current constant brightness and color settings. This function can remain at the
current setting for longer period of time than Constant Power mode.
• ECO 1 (80%)—Set the projector to 80% constant brightness and color settings.
• ECO 2 (50%)—Set the projector to 50% constant brightness and color settings.
3. Select ENTER.
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
• Light sensor calibration must be performed before enabling Constant Intensity and is
used for long-term projecting or blending purposes.
• When Constant Intensity is enabled, Dynamic Black and Real Black functions are
automatically disabled.
• When Picture Settings is changed under Constant Intensity, the light source mode
automatically changes to Constant Power.
Adjusting the light power on page 66 for
65