Christie GraphXMASTER RPMS-D100U User Manual page 53

OPERATION
RPMS, CS50 & CS70-D100U/UF User's Manual
3-36
– Enter a checkmark to display a list of channels that are
DISPLAY CHANNEL
available. These channels must be marked with a list icon
menu to appear in the Display Channel list.
– Enter a checkmark to display a slidebar over the current imge
DISPLAY SLIDEBARS
when an adjustable parameter is selected directly with a key. These "direct" slidebars
Pixel Position
Cont
include, , ,
can still be accessed, but will be hidden during adjustment.
DISPLAY ERROR MESSAGES
view error messages generated by the projector. Select Screen or All to see a brief
on-screen messages or select RS232 to be see messages via RS232 and RS-422 serial
communication only. To disable error message display, select Off.
LARGE MENU FONT
– Enter a checkmark in the Large Menu Font checkbox to
enlarge menu character size. Note: On-screen menus will be larger and may require
you to change the Menu Location to accommodate.
Geometry
Use this sub-menu to change keystone, select a test pattern or to access the Tiling
Setup menu.
KEYSTONE and TILING SETUP –
description of these options.
– This option is not supported by all models and will appear grayed
LENS CONTROL
out in these instances.
– Use the pull down list to select and
TEST PATTERN
immediately display one of the available internal test patterns.
When OFF is selected, no test pattern displays.
Bright
, . If "Display Slidebars" is unchecked these slidebars
– Use this pull down list to select the way you want to
Figure 3.19. Geometry Menu
Refer to Size and Position earlier in this section for a
in the Channel Setup