Christie GraphXMASTER RPMS-D100U User Manual page 38

USING "TILED" RESIZE PRESETS –
will want to resize the image according to the size of your wall. The last four "tiled"
resize presets are for this purpose. These options are only available when a display
wall has been defined in the Tiling Setup menu. See Working with Multiple
Projectors later in this section for instructions on how to define you display wall.
•
SELECT TILED FULL SIZE
defined array with the data from the incoming
signal. The data will be stretched horizontally and
vertically to fill all screens – this option does not
maintain aspect ratio.
•
SELECT TILED FULL WIDTH
from left-to-right with the data from the
incoming signal. The data will fill the width of
the array leaving a top and bottom black border
- aspect ratio maintained. Best suited for
HDTV signal.
•
SELECT TILED FULL HEIGHT
from top-to-bottom with the data from the
incoming signal. The data will fill the array
vertically while maintaining aspect ratio –
black borders will appear on the left and right
of the image.
•
SELECT TILED ANAMORPHIC
"wide-screen" (anamorphic) image in a 16:9
aspect ratio.
Size – controls both the image width and height in tandem, maintaining the current
aspect ratio (proportion) of data from the incoming signal.
When you are working with a display wall you
to fill all screens in the
to fill all screens
to fill all screens
to display a
RPMS, CS50 & CS70-D100U/UF User's Manual
OPERATION
3-21