Christie GraphXMASTER RPMS-D100U User Manual page 76

Servicing
4.2 Cleaning and
Maintenance
◊
Do not place the projector over a radiator or heat register. The projector should
not be placed in an enclosure unless proper ventilation is provided.
◊
Do not "poke" objects into the ventilation openings of the projector. They may
touch dangerous voltages or short-out components resulting in a fire or shock
hazard. Do not spill liquids of any kind into the projector. Should an accidental
spill occur, immediately unplug the projector and have it serviced by a qualified
service technician.
'
If any of the following conditions exist, immediately unplug the projector from the
power outlet and ask a qualified service technician to look at it.
◊
The power cord has been damaged.
◊
The internal cooling fans do not start operating when the projector is first turned
on. (NOTE: Fans in the lamp ballast will start once lamp is ignited.)
◊
Liquid has been spilled into the projector.
◊
The projector has been exposed to excessive moisture.
◊
The projector is not operating normally or its performance has significantly
deteriorated in a short period of time.
◊
The projector has been dropped or the shipping case (if applicable) has been
badly damaged.
Do not attempt to service the projector yourself. All
servicing must be performed by CHRISTIE accredited
Use replacement parts that are manufacturer-approved
only. Use of any other part other than the ones specified
by the manufacturer can result in fire, electric shock or
risk of personal injury and irreparable equipment
The projector itself requires little or no cleaning if it is operated in an
environmentally controlled environment. However, if you find that the projector may
need some cleaning based on its performance call a qualified service technician.
The table below provides cleaning instruction for those items on the projector that
may require periodic cleaning.
Always power down and unplug the projector before any
MAINTENANCE AND TROUBLESHOOTING
service technicians.
damage.
cleaning or servicing.
RPMS, CS50 & CS70-D100U/UF User's Manual
4-3