Brocade Communications Systems WFT-2D User Manual page 1701

TABLE 278
Field
UNIT_NEIGHBOR1
UNIT_NEIGHBOR2
UNIT_PRESENT
TABLE 279
Field
INTERFACE_ID
PHYSICAL_PORT_ID
SPEED_IN_MB
PHYSICAL_ADDRESS
LINK_ID
DUPLEX_MODE
IS_STACKING_INTERFACE
IS_PORT_PRESENT
PHYSICAL_DEVICE_ID
UNIT_NUMBER
SLOT_NUMBER
PORT_NUMBER
PORT_TYPE
UNIT_TYPE
Brocade Network Advisor SAN User Manual
53-1003154-01
PHYSICAL_DEVICE (Continued)
Definition
Stacking neighbor's unit(left) number for the
stackable devices. If there is no neighbor unit/non
stackable devices, then set to 0.
Stacking neighbor's unit(left) number for the
stackable devices . If there is no neighbor unit/non
stackable devices, then set to 0.
Used to identify the stack unit is present in the
chassis or not. Present-1 and Not Present-2.
PHYSICAL_INTERFACE
Definition
Primary key for this table.
Foreign key which refers PHYSICAL_PORT table.
Interface speed in Mega Bytes.
MAC address of this interface.
Foreign key which refers LINK table.
Interface duplex mode. Full/Half/Auto.
This flag is to indicate whether the interface is
stacking interface or peri port. 0 indicates
non-stacking, 1-indicates stacking interface,
2-indicates peri port.
This flag is to indicate whether the port is presented
in the device.
0 = Unknown
1 = Present
2 = Not present
For DCB switch, this is the core switch id.
For IP products, this is the physical_device_id in
physical_device table.
This is the unit number of which the interface is
located for IP stacking products.
If it is not applicable, the value is -1.
This is the slot number of which the interface is
located for the devices and switches.
If it is not applicable, the value is -1.
This is the port number of the interface.
This column is used to store the port type of the
interface. The value will be populated by the
NosSwitchAssetCollector during the discovery of the
VCS switch.The value of 0 means its edge port, and 1
means its trill port. Default value is 0.
Indicates unit type in the stack. This column stores
the model type of a stackable unit such as
"ICX6610-48P". For non-stacking device it will be
empty
Database tables and fields
Format
num
num
num
Format
int
int
int
varchar
int
smallint
num
int
int
int
int
int
smallint
varchar
H
Size
(2,0)
(2,0)
(1,0)
Size
64
(1,0)
64
1649