Christie Inspire Series User Manual
  1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. Inspire Series
  6. User manual

Christie Inspire Series User Manual

Hide thumbs Also See for Inspire Series:
Table of Contents

Advertisement

Quick Links

User Manual
020-001934-01
Inspire Series WUXGA

Advertisement

Table of Contents
loading

Related Manuals for Christie Inspire Series

Summary of Contents for Christie Inspire Series

  • Page 1 User Manual 020-001934-01 Inspire Series WUXGA...
  • Page 2 Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.

  • Page 3: Table Of Contents

    ........24 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 4 Adjust the color of the image ..........36 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 5 Adjusting network setting ......... . . 48 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 6 ........59 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 7 WEEE ............78 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 8: Introduction

    Introduction This manual is intended for Christie qualified installers and trained operators of Inspire Series projection systems. For complete Inspire Series product documentation and technical support, go to www.christiedigital.com. This projector is intended for use in a non-cinema environment. Safety and warning guidelines Read all safety and warning guidelines before installing or operating the projector.

  • Page 9: Ac/Power Precautions

    Caution! If not avoided, the following could result in minor or moderate injury. • ELECTRICAL and BURN HAZARD! Use caution when accessing internal components. • Only Christie qualified technicians are authorized to use the tools provided in the toolbox. Inspire Series User Manual 020-001934-01 Rev.

  • Page 10: Laser Safety Precautions

    Photosensitive seizure warning and other health risks Some viewers may experience discomfort when exposed to certain flashing images or lights contained in certain projector pictures or video games. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 11 Watching 3D projection may also cause motion sickness, perceptual after effects, disorientation, eye strain and decreased postural stability. Christie recommends taking frequent breaks to lessen the potential of these effects. If your eyes show signs of fatigue or dryness or if experiencing any of the above symptoms, immediately discontinue use of this device and do not resume using it for at least thirty minutes after the symptoms have subsided.

  • Page 12: Product Labels

    Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.

  • Page 13: Projector Overview

    Contact your dealer Record the information about your projector and keep this information with your records to assist with the servicing of your projector. If you encounter a problem with your Christie projector, contact your dealer. Purchase record...

  • Page 14: How The Projector Works

    A web page using Ethernet or from a PC or device using a wireless USB dongle (optional) How the projector works The Inspire Series projector accepts a variety of input signals for a wide range of commercial projection applications. Designed with solid-state illumination light sources and phosphor technology, the red, green and...

  • Page 15: Product Documentation

    Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website at www.christiedigital.com. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: •...

  • Page 16: Input/Output (I/O) Panel

    3D SYNC (IN) HDMI OUT 3D SYNC (OUT) HDMI1 (v2.0 4K) USB (5V 1.5A) HDMI2 AUDIO IN AUDIO OUT HDBaseT RS232-C REMOTE IN Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 17: Ir Remote Keypad

    3G-SDI HDBaseT CVBS PRESENT. Button Description SHUTTER Displays or blanks the video image. Turns the projector on. GAMMA Adjusts the mid-range levels. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 18 Displays the projector information. LENS H Adjusts the position of the image horizontally. LENS V Adjusts the position of the image vertically. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 19: Adjusting The Size And Position

    Adjusting the size and position Adjust the projector’s size and position. Christie recommends warming the lens before completing these procedures as focus may change as the lens warms. Adjusting the Projected Image Adjust the projected image’s height and horizontal tilt for better viewing.

  • Page 20: Stacking Application

    The maximum adjustable range of the rubber foot is 13 mm (0.5 inches). Adjust the rubber feet to avoid 13mm 13mm interference. Interference between two projectors. Interference between two projectors. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 21: Setting The Image Size Preset

    2. Adjust the slider by arrow keys or press ENTER to input the values of moving pixels. 3. After inputting the value, press ENTER to apply. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 22: Setting The Digital Size Of Display Image

    Geometry correction Modify the geometry of the display image directly on the projector. Connecting to Christie Twist and Mystique grays out the geometry correction settings on the projector. Uploading warp and blend from Twist and Mystique overwrites the currently applied geometry correction settings.

  • Page 23: Adjusting Horizontal Keystone

    2. To adjust the vertical keystone, adjust the slider by arrow keys or press ENTER to input the value you selected. 3. After inputting the value, press ENTER to apply. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 24: Adjusting Horizontal Pincushion

    4. After inputting the value, press ENTER to apply. 5. To adjust the other corner or direction, repeat step 2 to 4. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 25: Enabling Auto Warp Filter

    When the projection screen is not perfectly flat or rotated at an angle, warp the image to fit on the irregular surface. Warping an image Christie Twist offer various manual warping options to adjust the image shape with minimal performance impact. Refer to the Christie website (www.christiedigital.com) for product information and documentation.

  • Page 26: Downloading A Warp From The Projector Memory

    You can set blends on a projector when not using Christie Twist and Mystique. Connecting to Twist and Mystique grays out the blend settings on the projector. Applying blends from Twist and Mystique overwrites the blends directly set on the projectors.

  • Page 27: Blending Multiple Images

    Blending multiple images Use Christie Twist to manually configure edge blends and apply them to the projectors. Christie Twist Premium and Twist Pro offer advanced blending options. Refer to the Christie website (www.christiedigital.com) for product information and documentation. 1. Connect the projector and computer to the same network and subnet.

  • Page 28: Performing Auto Warp And Blend

    Mystique is an automated camera-based alignment and recalibration solution that lets you quickly stage, install, align, calibrate, and maintain multi-projection systems. Refer to the Christie website (www.christiedigital.com) for product information and documentation. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021)

  • Page 29: Adjusting The Image Settings

    ENTER to select color space manually. 3. To match up with the input signal, select appropriate color space: • Auto • Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 30: Adjusting The Image Sharpness

    • Frame Packing • Side by Side • Top and Bottom • Frame Sequential • 3. To confirm the selection, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 31: Inverting 3D Signal

    2. Adjust the slider by arrow keys or press ENTER to input the value. 3. After inputting the value, press ENTER to apply. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 32: Configuring The Video Settings

    1. Select Menu > Image Settings > Video Options > Temporal Noise Reduction. 2. Select appropriate level for temporal noise reduction. 3. To confirm the selection, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 33: Reducing The Mpeg Noise

    3. Adjust the slider by arrow keys or press ENTER to input the value. 4. After inputting the value, press ENTER to apply. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 34: Resetting The Input Levels

    User—Customized picture setting. See User configuration on page 35 for more details of creating a customized picture setting. 3. To confirm the selection, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 35: User Configuration

    Lights Out Timer—Set a timer for the laser light to turn off after detecting black content. The set value ranges from 0s to 20s. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 36: Enabling The Image Freeze

    While the change is negligible in most cases, you may prefer to recover the originally intended color performance before trying to match colors from several projectors. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 37: Adjusting Primary Colors

    Saturation values reflect the color shifting away from the primary color or toward white. 8. To confirm the selection, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 38: Setting The Wall Color

    1. Select Menu > Image Settings > Advanced Image Settings > Gamma. 2. Select the appropriate option: • Video • Film • Bright • • DICOM 3. Press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 39: Adjusting The White Peaking

    Save—Save all of the projector settings as user data. User can save up to five records. • Restore—Load the previously saved user data. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 40: Configuring System Settings

    You can also select Menu > Configuration > Lens Settings > Zoom. 6. Use the up and down arrow keys to adjust the focus of the image. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 41: Adjusting Lens Position

    2. Select Menu > Configuration > Lens Settings > Lens Shift Memory > Apply Position. 3. To apply specific lens setting, select the required record. 4. To confirm the selection, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 42: Locking The Lens Motor

    5. To swap, press ENTER. Adjusting on-screen display menus Adjust various on-screen display (OSD) settings including the position, OSD transparency and timing for OSD to disappear. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 43: Determining The On-Screen Display Position

    Adjust the time for on-screen display to disappear. 1. Select Menu > Configuration > Menu Preferences > Menu Time Out. 2. Select the appropriate time: Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 44: Setting Up Password Protection

    • Communication mode—More power consumption in standby mode which allows you to monitor the projector over a network cable. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 45: Setting The Ac Power

    1. Select Menu > Configuration > High Altitude. 2. To swap, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 46: Adjusting Ir Control Settings

    1. Select Menu > Configuration > Audio Settings. 2. Select to audio mute and adjust the volume. 3. To confirm the selection, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 47: Configuring Communications

    Default Gateway—Assign the network default gateway. • Primary DNS—Assign the primary DNS. • Secondary DNS—Assign the secondary DNS. 3. To apply the LAN settings, select Apply. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 48: Adjusting Wlan Setting

    Enable or disable to allow the CLI command pass through. 1. Select Menu > Configuration > Communications > Serial Port Echo. 2. To swap, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 49: Logging On To The Web User Interface

    1. Connect your computer and the projector directly using the RS-232 cable. 2. Set the same baud rate in both your computer and projector. Use commands to control the projector. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 50: Re-Connecting The Network

    Contrast Enhancement • Light Source Mode • Image Freeze • Information • Disable Warp/Blend Configuring date and time Configure date and time settings. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 51: Setting The Clock Mode

    1. Select Menu > Configuration > Date and Time > NTP Server. 2. Select the preferred NTP server: • time.google.com • asia.pool.ntp.org • europe.pool.ntp.org • north-america.pool.ntp.org 3. To confirm, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 52: Setting The Time Zone

    Schedule Mode displays AP Mode and the projector’s schedule functions are grayed out. 1. Select Menu > Configuration > Schedule > Schedule Mode. 2. Setup YYYY/MM/DD MM:SS. 3. To confirm, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 53: Viewing The Event List For The Day

    Reseting the schedule Reset all of the schedule settings. 1. Select Menu > Configuration > Schedule > Reset schedule. 2. Press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 54: Configuring Light Source

    ECO 1 (80%)—Set the projector to 80% constant brightness and color settings. • ECO 2 (50%)—Set the projector to 50% constant brightness and color settings. 3. Press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 55: Setting Constant Power

    2. Adjust the slider from 1 to 100 by arrow keys or press ENTER to input the value you selected. 3. After inputting the value, press ENTER to apply. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 56: Projector Information

    Choose the language you want displayed on projector display panel and on-screen display. 1. Select Menu > Language. 2. Select the appropriate language. 3. Press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 57: Selecting A Test Pattern

    2. Scroll through the list of test patterns by left and right arrow keys on remote control. 3. Select the required test pattern. 4. To confirm your selection, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 58: Configuring Input Settings

    Switch the main input source with second input source. 1. Select Menu > Input Switching & PIP > Swap. 2. To swap, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 59: Setting The Size Of Second Input Source

    Medium Large PBP, Main Left PBP, Main Top PBP, Main Right PBP, Main Bottom PIP, Sub Bottom Right PIP, Sub Bottom Left Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 60: Setting The Timing Detection Mode

    List all Sources—Select to list all the sources and then select the input source you want. • Auto Sources—Automatically search the source. 3. To confirm the selection, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 61: Adjusting The Sub Image

    1. Select Menu > Input Switching & PIP > EDID. 2. Select the HDMI version. 3. To confirm the setting, press ENTER. HDMI 2.0 is supported only by HDMI1 connector. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 62: Configuring The Hdmi Output

    1. Select Menu > Input Switching & PIP > HDMI Out put. 2. Select HDMI 1 or HDMI 2 as the HDMI output. 3. To confirm the setting, press ENTER. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 63: Signal Connectivity Specifications

    Signal connectivity specifications Identify the signal connectivity specifications for Inspire Series projector. The list of formats listed below are not exhaustive and other formats may be supported. For more information, contact Christie Technical Support. HDMI1/HDMI2 video formats Identify the video formats for the HDMI1/HDMI2 input.
  • Page 64 720 x 480 59.94 SDTV (576i) 720 x 576 1.25 EDTV (480p) 720 x 480 59.94 EDTV (576p) 720 x 576 1.25 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 65 Side by Side (1080p) 59.9 Top and 1280 x 720 Bottom 59.94 (720p) Top and 1920 x 1080 23.98 Bottom (1080p) 59.9 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 66 3840 x 2160 1.78 16:9 4096x2160 4096 x 2160 1.90 SMPTE (V): Video format is supported. (X): Video format is Not supported. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 67: Dvi Video Formats

    848 x 480 1024 x 768 1.33 SXGA 1152 x 864 1152 x 870 1.32 WXGA 1280 x 768 1.67 1280 x 800 16:10 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 68 720 x 480 59.94 EDTV (576p) 720 x 576 1.25 HDTV 1920 x 1080 1.78 16:9 (1080i) 59.94 HDTV 1280 x 720 (720p) 59.94 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 69 800 x 600 1.33 Sequential 1024 x 768 HDTV 1280 x 720 1.78 16:9 1080p 1920 x 1080 WUXGA 1920 x 1200 16:10 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 70 3840 x 2160 1.78 16:9 4096x2160 4096 x 2160 1.90 SMPTE (V): Video format is supported. (X): Video format is Not supported. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 71: Hdbaset Video Formats

    848 x 480 1024 x 768 1.33 SXGA 1152 x 864 1152 x 870 1.32 WXGA 1280 x 768 1.67 1280 x 800 16:10 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 72 720 x 480 59.94 EDTV (576p) 720 x 576 1.25 HDTV 1920 x 1080 1.78 16:9 (1080i) 59.94 HDTV 1280 x 720 (720p) 59.94 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 73 800 x 600 1.33 Sequential 1024 x 768 HDTV 1280 x 720 1.78 16:9 1080p 1920 x 1080 WUXGA 1920 x 1200 16:10 Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 74 • The signal with sampling rate of 4:2:0 is output as 4:2:2 if used by DSC compression. • The 4:2:2 signals are always output as 12bits. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 75: Picture-In-Picture/Picture-By-Picture (Pip/Pbp) Compatibility

    HDMI 1.4 ● ● ● HDMI1 HDMI 2.0 ● ● ● HDBaseT ● ● ● ● • Dot (●): PIP/PBP combinations are enabled. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 76: Regulatory

    CISPR 32:2014/EN 55032:2014, Class A - Information Technology • IEC 61000-3-2/EN61000-3-2 - Limits for Harmonic Current Emissions • IEC 61000-3-3/EN61000-3-3 - Limitations of Voltage Changes, Voltage Fluctuations, and Flicker Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 77: Immunity

    Equipment Regulation. Interference-Causing Equipment Regulation. Cet appareil numerique de la class A respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.

  • Page 78: Declaration Of Conformity For Eu Countries

    Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, recycle it. Inspire Series User Manual 020-001934-01 Rev. 1 (11-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
  • Page 79 Corporate of ces Worldwide of ces Christie Digital Systems USA, Inc. Australia Germany Republic of South Africa United Kingdom Cypress ph: +61 (0) 7 3624 4888 ph: +49 2161 664540 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000...

This manual is also suitable for:

Dwu860-isDwu960st-isDwu760-isDwu760a-isDwu960-is

Table of Contents