Utility mode
11.22 Configuring Functions (Soft Switches)
Soft switches for functions can be set according to your use.
Reminder
Do not alter any modes or bits not mentioned in this manual.
Note
When "Enhance Security" is set to "ON", the software switch settings
cannot be changed.
Software SW settings
Parameter
Mode Selection
Bit Selection
HEX Selection
bizhub 362/282/222
Description
Specifies the soft switch setting item with 3 digits.
An 8-digit number comprising the mode. Each bit from 0 to 7
is specified with a binary number (0 or 1) to configure func-
tions.
Allows the functions to be set using hexadecimal numbers (a
combination of 0 to 9 and A to F). For example, the bit spec-
ification of "0011 0000" would be "30" in hexadecimal.
11
11-67