Lens Block - Gestetner A294 Service Manual

6.3.2 LENS BLOCK

1. Remove the exposure glass. (See Exposure Glass.)
2. Remove the lens cover [A] (8 screws).
3. Remove the lens block [B] (4 screws, 3 connectors).
4. After reassembly, do the scanner and printer copy adjustment. (See
Replacement and Adjustment – Copy Image Adjustment.)
NOTE: Do not drive the scanner unit without the lens cover. The grounding plates
[C] will contact the 1st scanner and damage the scanner.
SM
CÓPIA NÃO CONTROLADA
[A]
[C]
6-19
CÓPIA NÃO CONTROLADA
SCANNER UNIT
[B]
A294R003.WMF
A294/A295