Detailed Descriptions; Tray And Stapler Junction Gate - Gestetner A294 Service Manual

2. DETAILED DESCRIPTIONS

2.1 TRAY AND STAPLER JUNCTION GATE

- Sort/Stack Mode -
[A]
[C]
B302D505.WMF
Depending on the finishing mode, the copies are directed up, straight through, or
down by the combination of the tray junction gate [A] and stapler junction gate [B].
These gates are controlled by the tray junction gate solenoid [C] and stapler
junction gate solenoid [D].
Upper Tray Mode
The stapler tray junction gate solenoid remains off and the tray junction gate
solenoid turns on. The copies go up to the upper tray.
Sort/Stack Mode
The tray junction gate solenoid and the stapler junction gate solenoid remain off.
The copies are sent to the shift tray directly.
Staple Mode
The stapler junction gate solenoid turns on. The copies go downwards to the
jogger unit.
SM
CÓPIA NÃO CONTROLADA
- Upper Tray Mode -
[A]
[C]
[D]
B302D506.WMF
[B]
8-7
CÓPIA NÃO CONTROLADA
TRAY AND STAPLER JUNCTION GATE
[D]
[B]
[A]
[C]
- Staple Mode -
[D]
[B]
B302D507.WMF
A294/A295