Exposure Lamp - Gestetner A294 Service Manual

6.3.4 EXPOSURE LAMP

[C]
1. Remove the exposure glass. (See Exposure Glass.)
2. Remove the front upper cover (7 screws, 1 connector). See Scanner Motor
Removal.
3. Remove the lamp regulator cover [A] (2 screws).
4. Remove the exposure lamp [B] (2 screws, 1 connector).
NOTE: When reinstalling the exposure lamp, pass the cable through the
opening [C] in the bracket.
SM
CÓPIA NÃO CONTROLADA
[B]
6-21
CÓPIA NÃO CONTROLADA
SCANNER UNIT
[A]
A294R050.WMF
A294/A295