Boards And Other Items; Sicu Board - Gestetner A294 Service Manual

BOARDS AND OTHER ITEMS

6.12 BOARDS AND OTHER ITEMS

6.12.1 SICU BOARD

[B]
A294R004.WMF
1. Remove the exposure glass (see Exposure Glass).
2. Remove the lens cover (8 screws) (see Lens Block).
3. Remove the original exit tray [A] (3 screws).
4. Remove the scanner right cover [B] (4 screws).
5. Remove the cover bracket [C] (4 screws).
6. Remove the cooling fan bracket [D] (2 screws).
7. Remove the SICU cover bracket [E] (7 screws).
8. Replace the SICU [F] (4 flat cables, 9 connectors, and 7 screws).
9. Remove the NV-RAM [G] from the old SICU and install it on the new board.
A294/A295
CÓPIA NÃO CONTROLADA
[A]
[C]
[G]
[F]
6-110
CÓPIA NÃO CONTROLADA
[D]
[E]
A294R005.WMF
SM