Input Check - Gestetner A294 Service Manual

SERVICE PROGRAM MODE

4.2.4 INPUT CHECK

Main Machine Input Check (SP5-803)
1. Access SP mode SP5-803.
2. Select the class 3 number that accesses the switch or sensor to be checked.
3. Check the status of the sensor or switch.
NOTE: To change to another class 3 level, press the "Next" or "Prev." key.
4. The reading ("0" or "1") will be displayed. The meaning of this is as follows.
Bit 7 Bit 6
0 0
5. Press the copy mode to return to the normal screen. Select a quantity, press
start and return to SP mode to view the changing bits.
Class 3 Bit
No. No.
7 Not Used
6 Not Used
LCT 3rd Paper End Sensor
5
(6th tray)
LCT 2nd Paper End Sensor
4
(5th tray)
1
LCT 1st Paper End Sensor
3
(4th tray)
2 3rd Paper End Sensor
1 2nd Paper End Sensor
0 1st Paper End Sensor
7 Not Used
6 Not Used
LCT 3rd Paper Feed Sensor
5
(6th tray)
LCT 2nd Paper Feed Sensor
4
(5th tray)
2
LCT 1st Paper Feed Sensor
3
(4th tray)
2 3rd Paper Feed Sensor
1 2nd Paper Feed Sensor
0 1st Paper feed Sensor
7 Not Used
6 Duplex Entrance Sensor
5 Duplex Jogger H.P.
3
4 Duplex Transport 3 Sensor
3 Duplex Transport 2 Sensor
2 Duplex Transport 1 Sensor
A294/A295
CÓPIA NÃO CONTROLADA
Bit 5 Bit 4
0 0
Description
4-60
CÓPIA NÃO CONTROLADA
Bit 3 Bit 2 Bit 1
0 0
Reading
0
Not paper end
Not paper end
Not paper end
Not paper end
Not paper end
Not paper end
Paper detected
Paper detected
Paper detected
Paper detected
Paper detected
Paper detected
Detected
Not detected
Detected
Detected
Detected
Rev. 2/2000
Bit 0
0 0
1
Paper end
Paper end
Paper end
Paper end
Paper end
Paper end
No paper
No paper
No paper
No paper
No paper
No paper
Not detected
Detected
Not detected
Not detected
Not detected
SM