Hot Roller Stripper Pawls - Gestetner B130 Service Manual

FUSING

3.5.3 HOT ROLLER STRIPPER PAWLS

CAUTION: Take special care to not damage the hot roller stripper pawls and the
tension springs.
B130R909.WMF
1. Fusing unit (
2. Separate the fusing unit into two sections: the hot roller section [A] and the
pressure roller section [B] (
NOTE: After removing the screws, lower the pressure roller section about
halfway and then slide it toward the front side to detach it.
3. (B129/B130/B168/B169) Support rollers [C]
4. Hot roller stripper pawls [D]
NOTE 1: Remove the spacer [E] if you are removing the hot roller assembly
( 3.5.4).
NOTE 2: To remove the right pawl, first remove the plastic spacer [E].
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
B130R910.WMF
3.5.1)
x 2).
CÓPIA NÃO CONTROLADA
[A]
[B]
3-14
[C]
[E]
[D]
SM