Paper Size Detection - Trays 2 & 3 - Gestetner A294 Service Manual

PAPER FEED
2.8.6 PAPER SIZE DETECTION – TRAYS 2 & 3
Paper Size
Switch
01111
00111
10011
01001
00100
00010
00001
10000
11000
11100
11110
For the 1st feed tray, the paper size has to be stored with SP5-019-001.
For the 2nd and 3rd feed tray (universal trays), the paper size switch [A] detects
the paper size. The paper size switch contains five microswitches. The paper size
switch is actuated by an actuator plate [B] at the rear of the tray. Each paper size
has its own unique combination as shown in the table and the CPU determines the
paper size by the combination.
Using the asterisk setting ( ), a wider range of paper sizes can be used, but the
size has to be entered with a UP mode.
Main Scan Direction
Sub Scan Direction
A294/A295
CÓPIA NÃO CONTROLADA
A4/A3 Version
A3-L
8 " x 13"
1/4
A4-L
A4-S
8 " x 13"
1/2
A5-L
A5-S
8 k-L (Taiwan version only)
16 k-L (Taiwan version only)
16 k-S (Taiwan version only)
Actuated - 0 De-actuated - 1 L: Lengthwise S: Sideways
Metric version
148 mm ~ 297 mm
210 mm ~ 432 mm
2-80
CÓPIA NÃO CONTROLADA
[B]
[A]
A294D712.WMF
Paper Size
LT/DLT Version
11" x 17"-L
8
1/2
8
1/2
8
1/2
5 " x 8
1/2
5 " x 8
1/2
8" x 10
8" x 10"-L
8" x 13"-L
10" x 14"-L
Inch version
5.9" ~ 11.8"
8.3" ~ 17.0"
Rev. 2/2000
" x 14"-L
" x 11"-L
" x 11"-S
"-L
1/2
"-S
1/2
"-L
1/2
SM