6.8.12 LIFT MOTOR REMOVAL (2ND & 3RD TRAYS)
[C]
[A]
A294R930.WMF
1. Turn off the main switch.
2. Remove the lower rear cover. (See Exterior.)
3. Remove the PSU (5 screws, all connectors) and IOB board (4 screws, all
connectors). See Boards and Other Items.
4. Remove the tension spring [A].
5. Remove the screw [B].
6. Remove the lower timing belt [C].
7. Disconnect the connectors [D].
8. Remove the lift motors [E] (2 screws each).
SM
CÓPIA NÃO CONTROLADA
[B]
[E]
[D]
[D]
6-73
CÓPIA NÃO CONTROLADA
PAPER FEED
[E]
A294R931.WMF
A294/A295