Jogger Motor Replacement - Gestetner A294 Service Manual

6.10.4 JOGGER MOTOR REPLACEMENT

[A]
1. Remove the duplex inner cover. (See Duplex Unit Inner Cover Removal.)
2. Remove the duplex grip [A] (2 screws).
3. Remove the E-ring [B] and slide the duplex grip shaft [C] to the left.
4. Remove the jogger motor [D] (2 screws, 1 connector, 2 clamps).
NOTE: When putting back the jogger motor, put back the duplex grip shaft and E-
ring first. Then, tighten the screws for the jogger motor.
SM
CÓPIA NÃO CONTROLADA
[C]
6-99
CÓPIA NÃO CONTROLADA
PAPER EXIT/DUPLEX UNIT
[D]
[B]
A294R803.WMF
A294/A295