Adf Image Adjustment - Gestetner A294 Service Manual

COPY IMAGE ADJUSTMENT: PRINTING/SCANNING

6.13.4 ADF IMAGE ADJUSTMENT

Registration
NOTE: Make a temporary test chart as shown below left, using A3/DLT paper.
1. Place the temporary test chart on the ADF and make a copy from one of the
feed stations.
2. Check the registration, and adjust using the following SP modes if necessary.
Side-to-side Registration
Leading Edge Registration (Thin original mode)
Leading Edge Registration (Single-sided/Duplex: front)
Leading Edge Registration (Duplex: rear)
A294R637.WMF
A294/A295
CÓPIA NÃO CONTROLADA
A: Leading Edge Registration
B: Side-to-side Registration
6-124
CÓPIA NÃO CONTROLADA
Rev. 02/2000
SP mode
SP6-006-1
SP6-006-2
SP6-006-3
SP6-006-4
A
B
A294R692.WMF
SM