Rev. 9/2001
4.2 SERVICE PROGRAM MODE
4.2.1 SERVICE PROGRAM MODE OPERATION
The service program (SP) mode is used to check electrical data, change modes,
and adjust values.
Service Program Access Procedure
Entering SP mode
1) Press the following keys in sequence.
$ → . → - → 4 →
Hold the
C
2) A menu of SP modes is displayed on the LCD.
NOTE: The installed applications appear as Copy SP and Printer SP. If the
printer application is not installed, its name does not appear.
SM
CÓPIA NÃO CONTROLADA
key for more than 3 seconds.
4-5
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
C
A294M001.PCX
A294/A295