Duplex Tray Feed Mechanism - Gestetner A294 Service Manual

PAPER EXIT/DUPLEX

2.11.5 DUPLEX TRAY FEED MECHANISM

[A]
[B]
In duplex mode, after the paper leaves the inverter, the duplex inverter gate
solenoid [A] switches the duplex inverter junction gate [B] to direct the paper to the
duplex tray. The paper is fed through the duplex tray by duplex transport rollers 1
[C], 2 [D], 3 [E], and the duplex feed roller [F].
If duplex mode is not selected, the solenoid does not switch the duplex inverter
junction gate, and the paper goes to the output tray or finisher face down.
A294/A295
CÓPIA NÃO CONTROLADA
[C] [D]
2-114
CÓPIA NÃO CONTROLADA
[E] [F]
A294D806.WMF
SM