Mechanical Side Registration Adjustment - Gestetner A294 Service Manual

PAPER FEED

6.8.19 MECHANICAL SIDE REGISTRATION ADJUSTMENT

[A]
A294R656.WMF
NOTE: Normally the side registration of the image can be adjusted with SP mode.
When the punch hole positions are not aligned from a particular feed
station, adjusted the side registration by changing the tray cover position
for that tray, as described below. Then adjust the side registration of the
image with the SP mode.
1. Pull out the tray.
2. Move the plate [A] as shown.
Adjustment range: 0 ± 2.0 mm adjustment step: 1.0 mm/step
A294/A295
CÓPIA NÃO CONTROLADA
6-82
CÓPIA NÃO CONTROLADA
[A]
A294R613.WMF
SM