Key Counter Installation - Gestetner A294 Service Manual

KEY COUNTER INSTALLATION

3.7 KEY COUNTER INSTALLATION
[C]
A294I532.WMF
A294I204.WMF
Common Steps
1. Hold the key counter plates [A] on the inside of the key counter bracket [B] and
insert the key counter holder [C].
2. Secure the key counter holder to the bracket (2 screws).
3. Attach the key counter cover [D] (2 screws).
4. Remove the small cover [E] on the right side of the copier as shown.
5. Remove the jumper connector [F].
If the optional LCT is not installed:
The following steps 6 to 8 are for installing the key counter without the optional
LCT. If the LCT is installed, skip steps 6 to 8, and go to step 9.
6. Install the stepped screw [G].
7. Install the key counter assembly [H] (1 screw).
8. Instruct the user's key operator to enable the key counter with the user tools
(User Tools – System Settings – Count Manager – Key Counter).
A294/A295
CÓPIA NÃO CONTROLADA
[A]
[B]
[H]
[G]
3-28
CÓPIA NÃO CONTROLADA
[D]
[F]
[E]
A294I203.WMF
SM