Rev. 04/2000
6.6.2 DEVELOPER REPLACEMENT
A294R542.WMF
1. Take out the development unit. (Refer to Development Unit Removal.)
2. Place the development unit on a sheet of paper [A].
3. Remove the two screws [B] that hold the toner hopper [C].
4. Remove the toner hopper from the development unit.
5. Turn over the development unit. Then turn the paddle roller knob [D] to empty
the remaining developer onto the sheet. (The knob [D] allows the paddle roller
to be turned counterclockwise only.)
NOTE: Dispose of used developer in accordance with local regulations.
Make sure that no developer remains on the development rollers or in
⇒
the development unit.
NOTE: When replacing the toner hopper unit, be sure to follow the instructions
on pages 3-11 and 12 of the Service Manual.
SM
CÓPIA NÃO CONTROLADA
DEVELOPMENT AND TONER SUPPLY
[A]
6-43
CÓPIA NÃO CONTROLADA
[B]
A294R302.WMF
[D]
[C]
A294/A295