Nvram Data Download - Gestetner A294 Service Manual

NVRAM DATA DOWNLOAD

4.5 NVRAM DATA DOWNLOAD
The NVRAM data in the SICU and BCU can be downloaded to a flash memory
card. The downloaded data can be copied back to the machine.
This is useful to save the settings before a RAM clear is done. The procedure is as
follows:
NOTE: It is recommended that the current settings are printed out before starting
the following procedure, in case the download fails.
Download from the SICU and BCU NVRAMs to the Flash Memory Card
1. Turn the main switch off.
2. Plug a blank flash memory card into the card slot of the SICU.
NOTE: Make sure that the surface printed "A" faces upwards.
3. Turn on the main switch.
NOTE: If the flash memory card contains SICU and BCU firmware, the
firmware download screen will now appear. Press [EXIT] on this screen
to go on to step 4. (Note that the firmware on the card will be erased by
the following steps.)
4. Select [3. NVRAM Upload]
5. Press [EXEC] on the display.
6. After the download is completed, turn the main switch off and remove the flash
memory card.
Download from the Flash Memory Card to the NVRAMs
NOTE: The download can be done separately for the BCU or SICU, or for user tool
settings only.
1. Turn the main switch off.
2. Plug the flash memory card which contains the NVRAM data into the card slot
of the SICU.
NOTE: Make sure that the surface printed "A" faces upwards.
3. Turn on the main switch.
4. Select [2. NVRAM Download]
5. Select the required menu item from the following.
[1. All NVRAM Download]:
[2. Mode NVRAM Down load]:
[3. SICU NVRAM Down load]:
[4. BCU NVRAM Down load]:
6. Press [EXEC] on the display.
7. After the download is completed, turn the main switch off and remove the flash
memory card.
A294/A295
CÓPIA NÃO CONTROLADA
(Downloads all data in the NVRAMs to the SICU and BCU.)
(Downloads only UP mode settings)
(Downloads the data to the NVRAM on the SICU)
(Downloads the data to the NVRAM on the BCU)
4-80
CÓPIA NÃO CONTROLADA
SM