Paper Registration - Gestetner A294 Service Manual

PAPER FEED

2.8.10 PAPER REGISTRATION

Overview
The registration sensor [A] is positioned just before the registration rollers [B].
When the paper leading edge activates the registration sensor, the registration
motor is off and the registration rollers are not turning. However, the upper relay
roller (or LCT relay roller for feed from the LCT) [C] stays on for a bit longer. This
delay allows time for the paper to press against the registration rollers and buckle
slightly to correct skew. Then, the registration motor energizes and the relay clutch
re-energizes at the proper time to align the paper with the image on the drum. The
registration and relay rollers feed the paper to the image transfer section.
The registration sensor is also used for paper misfeed detection.
A294/A295
CÓPIA NÃO CONTROLADA
2-90
CÓPIA NÃO CONTROLADA
[A]
[C]
From the LCT
[B]
[C]
A294D702.WMF
SM