Duplex Transport Sensor 1/Duplex Inverter Sensor - Gestetner A294 Service Manual

6.10.8 DUPLEX TRANSPORT SENSOR 1/DUPLEX INVERTER
SENSOR
[F]
[E]
A294R808.WMF
1. Pull out the duplex unit.
2. Remove the upper duplex cover.
3. Remove the reverse trigger roller [A] (1 E-ring, 2 bushings, and 2 solenoid
links).
4. Remove the 2 screws [B] (front side: shoulder screw) securing the left upper
cover and slide the left upper cover [C] to the right and remove it.
5. Replace each sensor [D] (1 connector each).
NOTE: When putting back the upper left cover, make sure that the cutouts [E]
catch the duplex side plate projections [F] and the hooks [G] are
underneath the bracket plate [H].
SM
CÓPIA NÃO CONTROLADA
[A]
[G]
[C]
[H]
6-103
CÓPIA NÃO CONTROLADA
PAPER EXIT/DUPLEX UNIT
[B]
[D]
A294R809.WMF
A294/A295