Toner Supply Motor And Toner Supply Motor Sensor Removal - Gestetner A294 Service Manual

TONER BANK
6.11.3 TONER SUPPLY MOTOR AND TONER SUPPLY MOTOR
SENSOR REMOVAL
1. Remove the upper right cover.
2. Remove the bracket [A] with the toner supply motor (2 screws, 2 connectors
and 2 pipes).
3. Remove the toner supply motor sensor [B].
4. Remove the toner supply motor [C] (2 screws).
NOTE: When putting back the parts, make sure that the 2 pipes are connected
at the correct positions, as shown.
A294/A295
CÓPIA NÃO CONTROLADA
6-108
CÓPIA NÃO CONTROLADA
[B]
[A]
[C]
A294R912.WMF
Rev. 02/2000
SM